Time Setting: Pull out the crown and rotate the crown clockwise to set the time.
Date Setting: Pull out the crown halfway and rotate the crown to set the date, do not set the date between 9:00 PM and 1:00 AM otherwise the date setting may fail.
Time Setting: Pull out the crown fully and rotate the crown clockwise to set the time.
Before setting the time please make sure the stopwatch function is off and the second hand pointing to “0”, otherwise please follow steps below:
Date Setting: Pull out the crown halfway to P1 and rotate the crown to set the date, do not set the date between 9:00 PM and 1:00 AM otherwise the date setting may fail.
Time Setting: Pull out the crown fully to P2 and rotate the crown clockwise to set the time.
General Timing Records: Press A to start, press A again to stop, press B to reset.
Cumulative Timing Records: Press A to start, press A againt to suspend, press A once more to restart, repeat pressing A to suspend and restart as required, press B to reset.
Split Timing Records: Press A to start, press B to record split time, press B again to release, press B once more to record another split time, repeat pressing B to record more split time as required, press A again to stop, press B to reset.
For Date Setting, Time Setting and Stopwatch instructions refer to Chronograph PE903.
Analogue Time Setting: Pull out the crown and rotate the crown clockwise to set the time.
Digital Time Setting: Under the normal status press C three Times into the time setting mode, push A and B to set the time according to certain order: second-minute-hour-date-month-day, press C again to exit when finished.
Chime On Every Hour: Push B and C together to turn the time signal on/off.
Alarm Setting: Under the normal status press C twice into the alarm setting mode, push A and B to set the alarm time according to certain order: hour-minute, press C again to exit when finished.
When the alarm sounds push B to stop.
Push A and B together to turn the alarm on/off.
Stopwatch: Under the normal status press C once into the stopwatch mode, push A to start, push A again to stop, push B to reset, push C again to exit when finished.
IMPORTANT – All Automatic watches need movement to function and wind while being worn; However if not worn for long periods the Watch will not function from start. Please follow below instructions before wearing to re-start functions:
Hand Winding: Twist the crown clockwise at position 1 of the crown approximately 30 rotations to get full winding.
Time Setting: Pull out the crown to position 2, rotate crown to move the hands for setting time, push back the crown to position 1 when finished.
WICHTIG - Alle Automatikuhren brauchen Bewegung, um zu funktionieren und sich aufzuziehen, während sie getragen werden; Wenn sie jedoch längere Zeit nicht getragen werden, funktioniert die Uhr nicht mehr. Bitte befolgen Sie die folgenden Anweisungen vor dem Tragen, um die Funktionen wieder zu starten:
Handaufzug: Drehen Sie die Krone bei Position 1 im Uhrzeigersinn um ca. 30 Umdrehungen, um den vollen Aufzug zu erhalten.
Zeiteinstellung: Ziehen Sie die Krone auf Position 2 heraus, drehen Sie die Krone, um die Zeiger zum Einstellen der Uhrzeit zu bewegen, und drücken Sie die Krone anschließend wieder auf Position 1 zurück.
(only applicable to Anthony James of London models which have digital functions)
To Set Time
To Use the Stopwatch Function
To Set Alarm
What/How the Watches Display
